Introducing to programming LEGO® MINDSTORMS® EV3

Press the Back button and hold it for 5 seconds

Press and hold the Left and Right buttons for 5 seconds

Press and hold both the Center button and Back button

Press the Center button

Remove the rechargable Li-Ion battery pack

Press and hold the Left and Right buttons for 5 seconds

Press the Back button until a Shut Down dialog box appears, then selecting the check with the Center button

Insert the Shut Down USB adapter into the USB port on the side of the EV3

Touch the screen with an included stylus pen

Use the LEGO IR remote

Use the direction buttons to navigate, Center button to select, and Back button to cancel or go back.

Use the Sound sensor and the built-in voice commands

Run Recent (first tab) > Select the program then press the center button

File Navigation (second tab) > Select the Project > Select the Program

Brick Apps (third tab) > Port View > Select the motor or sensor that you just recently used to run that program

Settings (fourth tab) > Brick Info > Recently Run, then use the center button to select

Run Recent (first tab) > Select the program then press the center button

File Navigation (second tab) > Select the Project > Select the Program

Brick Apps (third tab) > Port View > Select the project that is linked to available sensors and motors

Settings (fourth tab) > Brick Info > Projects, then use the center button to select the programs

Plugging the EV3 into the computer and using the EV3 Software to check

Using the Brick Apps (third menu) > Port View > Select the motor or sensor you want to view

Adding a block to display the motor/sensor value when running a program

Attaching a second screen adapter to the USB Port on the side of the EV3

On the back of the EV3

In the Settings (fourth tab) menu

Behind the battery pack

On the EV3 Software